We provide 70-740 exam which are the best for clearing 70-740 test, and to get certified by Microsoft Installation, Storage, and Compute with Windows Server 2016. The 70-740 exam covers all the knowledge points of the real 70-740 exam. Crack your Microsoft 70-740 Exam with latest dumps, guaranteed!

Online 70-740 free questions and answers of New Version:

NEW QUESTION 1
DRAG DROP
You are planning the configuration of a virtual network switch for a Hyper-V environment. The environment will contain the following Hyper-V hosts:
- A server named Server1 will have 10 virtual machines that must be able to communicate with each other. The virtual machines must be prevented from communicating with Server1 and all other servers on the corporate network.
- A two-code failover cluster named Cluster1 will have 20 virtual machines. The virtual machines will
run on both nodes. Hyper-V hosts on the corporate network must be able to connect to the virtual machines.
Which type of virtual switch should you select for each Hyper-V host? To answer, drag the appropriate virtual switch types to the correct hosts. Each virtual switch type must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
70-740 dumps exhibit

    Answer:

    Explanation: 70-740 dumps exhibit

    NEW QUESTION 2
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
    have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You are a server administrator at a company named Contoso, Ltd.
    Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
    70-740 dumps exhibit
    All of the virtual switches are of the external type.
    You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
    Solution: You implement live migration by using Host3 and Host4. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    NEW QUESTION 3
    DRAG DROP
    You have a server named Server1 that runs Windows Server 2016.
    You plan to deploy Internet Information Services (US) in a Windows container. You need to prepare Server1 for the planned deployment.
    Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in
    the correct order
    70-740 dumps exhibit

      Answer:

      Explanation: 70-740 dumps exhibit

      NEW QUESTION 4
      HOTSPOT
      You have a four-node Hyper-V cluster named Cluster1.
      A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a
      virtual switch named Network1.
      You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node.
      What command should you run? To answer, select the appropriate options in the answer area.
      70-740 dumps exhibit

        Answer:

        Explanation: 70-740 dumps exhibit

        NEW QUESTION 5
        You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
        Server1 has three network adapter cards that are connected to virtual switches named vSwitch1,
        vSwitch2 and vSwitch3.
        You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
        70-740 dumps exhibit
        You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
        What should you do?

        • A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
        • B. From Hyper-V Manager on Server1, modify the settings on VM1.
        • C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
        • D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

        Answer: D

        Explanation: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic-teaming/nic-teaming

        NEW QUESTION 6
        Note: This question is part of a series of questions that present the same scenario. Each question in
        the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
        After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You are a server administrator at a company named Contoso, Ltd.
        Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
        70-740 dumps exhibit
        All of the virtual switches are of the external type.
        You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
        Solution: You implement live migration by using Host2 and Host4. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: A

        NEW QUESTION 7
        You have a server named Server1 that runs Windows Server 2016. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.
        You create a virtual machine named VM1 on Server1 by running the following cmdlets.
        70-740 dumps exhibit
        You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
        What should you do?

        • A. Modify the SwitchType parameter of Switch1.
        • B. Modify the DefaultFlowMinimumBandwidthWeight parameter of Switch1.
        • C. Add a SCSI controller to VM1.
        • D. Add a legacy network adapter to VM1.

        Answer: D

        NEW QUESTION 8
        HOTSPOT
        You have a DNS server named Server1.
        The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)
        70-740 dumps exhibit
        The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)
        70-740 dumps exhibit
        The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)
        70-740 dumps exhibit
        Server1 does not contain any DNS zones.
        For each of the following statements, select Yes if the statement is true. Otherwise, select No.
        70-740 dumps exhibit

          Answer:

          Explanation:
          Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled.
          Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

          NEW QUESTION 9
          You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.
          On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.
          70-740 dumps exhibit
          All three virtual machines are connected to Switch1.
          You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
          What should you do?

          • A. On Server2, configure the VLAN ID setting of Switch1.
          • B. On Server2, create an external switch and connect VM3 to the switch.
          • C. Modify the subnet mask of VM1 and VM2.
          • D. Configure network virtualization for VM1 and VM2.

          Answer: D

          NEW QUESTION 10
          Note: This question is part of a series of questions that present the same scenario. Each question in
          the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
          You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.
          70-740 dumps exhibit
          You need to ensure that you can perform a live migration of VM1 from Host1 to Host2. Solution: You move Host2 to the contoso.com domain.
          Does meet the goal?

          • A. Yes
          • B. No

          Answer: B

          NEW QUESTION 11
          You have decided to install Windows Server 2016 by choosing the Service Core Installation option. If
          you want to install, configure or uninstall server roles remotely, what tool would you use?

          • A. Any of these
          • B. Windows PowerShell
          • C. Remote Server Administration Tools (RSAT)
          • D. Server Manager

          Answer: A

          NEW QUESTION 12
          After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          You have a server named Server1 that runs Windows Server 2016.
          You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
          You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
          Solution: You mount the volume to C:\Backup, and you format the volume by using NTFS. Does this meet the goal?

          • A. Yes
          • B. No

          Answer: A

          NEW QUESTION 13
          HOTSPOT
          You have a server named Served that runs Windows Server 2016. Server1 has the Windows Application Proxy role service installed. You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.
          70-740 dumps exhibit
          Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic
          70-740 dumps exhibit

            Answer:

            Explanation: 70-740 dumps exhibit

            NEW QUESTION 14
            Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
            You have two servers named Server1 and Server2 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed
            An iSCSI SAN connects to the network
            You create a LUN on the SAN and configure both servers to connect to the iSCSI target
            You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage
            You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage
            simultaneously.
            Which tool should you use?

            • A. the clussvc.exe command
            • B. the cluster.exe command
            • C. the Computer Management console
            • D. the configurehyperv.exe command
            • E. the Disk Management console
            • F. the Failover Cluster Manager console
            • G. the Hyper-V Manager console
            • H. the Server Manager Desktop app

            Answer: F

            NEW QUESTION 15
            You want to boot a Linux Operating System with the Secure Boot option enabled in a virtual machine.
            This will be the first time you boot the OS. What must you do?

            • A. Set the -BootOrder to HardDiskDrive
            • B. Configure the virtual machine to use the Microsoft UEFI Certificate Authority
            • C. You can't enable Secure Boot with Linux
            • D. Set -EnableSecureBoot without specifying a template

            Answer: B

            Explanation: Linux operating systems running on newer generation virtual machines can boot with the Secure Boot option enabled. Before you boot the virtual machine for the first time, you must configure the virtual machine to use the Microsoft UEFI Certificate Authority. You can do this from Hyper-V Manager, Virtual Machine Manager, or an elevated Windows Powershell session.

            NEW QUESTION 16
            Note This question is part of a series of questions that use the same scenario. For your convenience,
            the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
            Start of Repeated Scenario:
            Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
            The domain contains nine servers that are configured as shown in the following table.
            70-740 dumps exhibit
            The virtual machines are configured as follows:
            • E ach virtual machine has one virtual network adapter
            • VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
            • All of the servers on the network can communicate with all of the virtual machines. End of repeated Scenario.
            You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
            What should you do?

            • A. Configure the virtual machines as shielded virtual machines.
            • B. Run the Set-VMProcessor cmdlet and specify the –EnableHostResourceProtection Parameter.
            • C. Run the Set-VMProcessor cmdlet and specify the –MaximumCountPerNumaNode Parameter.
            • D. Configure VM Network Adapter Isolation.

            Answer: B

            NEW QUESTION 17
            Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
            After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
            You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
            You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.
            70-740 dumps exhibit
            You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
            Solution: You shut down VM1, configure the processor compatibility settings, and then start VM1. Does meet the goal?

            • A. Yes
            • B. No

            Answer: A

            NEW QUESTION 18
            Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
            A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
            The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
            You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
            The CIO of Contoso identifies the following requirements for the company’s IT department:
            Which two actions should you perform to meet the encryption requirement for WSUS? Each correct answer presents part of the solution.

            • A. Require SSL on the Inventory virtual directory.
            • B. Require SSL on the ClientWebService virtual directory.
            • C. Create a firewall rule to allow TCP port 443.
            • D. Create a firewall rule to allow TCP port 8531.

            Answer: BC

            Explanation: References:
            https://technet.microsoft.com/en-us/library/bb633246.aspx https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers

            NEW QUESTION 19
            Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
            After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
            You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
            You pull the Microsoft/iis Docker image to Server1.
            You need to view the available space in the Microsoft/iis Docker image. Solution: You run the command docker run –d Microsoft/iis.
            You open Disk Management on Server1. Does this meet the goal?

            • A. Yes
            • B. No

            Answer: B

            NEW QUESTION 20
            Note: This question is part of a series of questions that present the same scenario. Each question in
            the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
            After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
            You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
            The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)
            70-740 dumps exhibit
            You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
            Solution: You start the Hyper-V Guest Service Interface service on VM1. Does this meet the goal?

            • A. Yes
            • B. No

            Answer: A

            Explanation: References:
            https://technet.microsoft.com/en-us/library/dn798297(v=ws.11).aspx

            100% Valid and Newest Version 70-740 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/70-740-exam-dumps.html (New 296 Q&As)