Want to know 70-740 dumps features? Want to lear more about 70-740 dumps experience? Study 70-740 exam. Gat a success with an absolute guarantee to pass Microsoft 70-740 (Installation, Storage, and Compute with Windows Server 2016) test on your first attempt.

Microsoft 70-740 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a Web Application Proxy.
Which server role or role service should you install on Server1?

  • A. Web Server (IIS)
  • B. Network Policy and Access Services
  • C. Direct Access and VPN (RAS)
  • D. Active Directory Federation Services
  • E. Remote Access

Answer: E

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
70-740 dumps exhibit
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement a Hyper-V Replica between Host2 and Host4. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 3
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 As virtual machine named VM1 runs on Cluster1
You need to configure monitoring of VM1 The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly
Which tool should you use?

  • A. the clussvc.exe command
  • B. the cluster.exe command
  • C. the Computer Management console
  • D. the configurehyperv.exe command
  • E. the Disk Management console
  • F. the Failover Cluster Manager console
  • G. the Hyper-V Manager console
  • H. the Server Manager Desktop app

Answer: F

NEW QUESTION 4
DRAG DROP
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first node cluster of a Network Controller cluster
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order
70-740 dumps exhibit

    Answer:

    Explanation: 70-740 dumps exhibit

    NEW QUESTION 5
    HOTSPOT
    You implement a Windows Server 2016 failover cluster named Cluster1 as a highly available file server.
    You run the Get-Cluster cmdlet and receive the following output.
    70-740 dumps exhibit
    Use the drop-down menus to select the answer choice that completes each statement based on the
    information presented in the graphic.
    70-740 dumps exhibit

      Answer:

      Explanation: 70-740 dumps exhibit

      NEW QUESTION 6
      You have a Hyper-V host named Served That runs Windows Server 2016
      Server1 has a virtual machine named VM1 VM1 is configured to run the Docker daemon. On VM1 you have a container network that uses transparent mode
      You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?

      • A. On VM1, rundocker network connect
      • B. On Server1 runGet-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter- MacAddressSpoofing On
      • C. On Server1, rundocker network connect
      • D. On VM1, runGet-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter- MacAddressSpoofing On.

      Answer: D

      NEW QUESTION 7
      Nano Server is foundational to the modern datacenter and is useful in two core scenarios: As a private cloud infrastructure it's particularly useful for clustered Hyper-V, clustered storage and core networking services scenarios; or as an application platform it's highly optimized for modern distributed and cloud-based apps which leverage containers and micro service architectures.
      Is the following statement TRUE or FALSE?
      A local interface with UI support is available for offline management of Nano Servers?

      • A. TRUE
      • B. FALSE

      Answer: B

      Explanation: A local interface with UI support is NOT available for Nano servers. You must administer them remotely using PowerShell.

      NEW QUESTION 8
      Note This question is part of a series of questions that present the same scenario. Each question in
      the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You are a server administrator at a company named Contoso, Ltd.
      Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
      70-740 dumps exhibit
      All of the virtual switches are of the external type.
      You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
      Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 9
      You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 contains a volume named Volume1.
      You implement a Storage Replica that replicates the contents of Volume1 from Server1 to Server2. Server1 fails.
      From Server2, you need to ensure that you can access the contents of Volume1. What should you run?

      • A. Update-StoragePool
      • B. Set-SRPartnership
      • C. vssadmin revert shadow
      • D. Clear-FileStorageTier

      Answer: B

      Explanation: References:
      https://docs.microsoft.com/en-us/windows-server/storage/storage-replica/server-to-server-storage-replication

      NEW QUESTION 10
      DRAG DROP
      You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
      You plan to install the Hyper-V server role on VM1.
      You need to ensure that you can configure VM1 to host virtual machines
      How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
      70-740 dumps exhibit

        Answer:

        Explanation: 70-740 dumps exhibit

        NEW QUESTION 11
        Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
        You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.
        You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

        • A. the Mount-VHD cmdlet
        • B. the Diskpart command
        • C. the Set-VHD cmdlet
        • D. the Set-VM cmdlet
        • E. the Set-VMHost cmdlet
        • F. the Set-VMProcessor cmdlet
        • G. the Install-WindowsFeature cmdlet
        • H. the Optimize-VHD cmdlet

        Answer: F

        NEW QUESTION 12
        You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller.
        You install the DNS Server server role on Server1.
        You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

        • A. Set-DnsServer
        • B. Active Directory Sites and Services
        • C. Dns.exe
        • D. Dnscmd.exe

        Answer: D

        Explanation: https://technet.microsoft.com/en-us/library/ee649181(v=ws.10).aspx

        NEW QUESTION 13
        DRAG DROP
        Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
        A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
        The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
        You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
        The CIO of Contoso identifies the following requirements for the company’s IT department: Deploy a failover cluster to two new virtual machines.
        Store all application databases by using Encrypted File System (EFS).
        Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
        Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
        Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
        Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
        You need to configure the storage solution for the planned failover cluster.
        You create two new generations 2 virtual machines on two separate Hyper-Vhosts named VM11 and VM12.
        Which three actions should you perform in sequence next? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
        70-740 dumps exhibit

          Answer:

          Explanation: 70-740 dumps exhibit

          NEW QUESTION 14
          You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
          To each server you attach a new 4-TB SATA hard disk.
          You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
          Which command should you run before you enable Storage Space Direct?

          • A. Add-ClusterSharedVolume –Name “Disk 1” –Cluster Cluster1
          • B. New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
          • C. Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
          • D. New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString “Server1,Server2,Server3,Server4”

          Answer: B

          NEW QUESTION 15
          HOTSPOT
          You plan to deploy three servers named Server1, Server2, and Server3 that will run Windows Server 2016. The servers will have the following disk configurations:
          Server1 will have a C: drive of 2 TB.
          Server2 will have two disks. The C: drive will be 2 TB. The D: drive will be 1TB. D: must support file system-based compression.
          Server3 will have two disks. The C: drive will be 2 TB. The D: drive will be 1TB and must support file- system based quotas.
          Which file system can you use for each drive? To answer, select the appropriate options in the answer area.
          70-740 dumps exhibit

            Answer:

            Explanation: 70-740 dumps exhibit

            NEW QUESTION 16
            After you answer a question in this section, you will NOT be able to return to it. As a result, these
            questions will not appear in the review screen.
            You have a server named Server1 that runs Windows Server 2016.
            You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
            You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
            Solution: You mount the volume to C:\Backup, and you format the volume by using exFAT. Does this meet the goal?

            • A. Yes
            • B. No

            Answer: B

            NEW QUESTION 17
            Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
            A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
            The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
            You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
            The CIO of Contoso identifies the following requirements for the company’s IT department:
            Deploy a failover cluster to two new virtual machines.
            Store all application databases by using Encrypted File System (EFS).
            Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
            Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
            Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
            Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
            Which networking mode should you configure for the Windows containers?

            • A. 12tunnel
            • B. 12bridge
            • C. network address translation (NAT)
            • D. transparent

            Answer: C

            Explanation: References: https://blogs.technet.microsoft.com/virtualization/2016/05/05/windows-container- networking/

            NEW QUESTION 18
            You have Nano Server image named Diskl.vhdx.
            You mount Diskl.vhdx.
            You need to add a folder that contains several files to the image. Which tool or cmdlet you should use?

            • A. File Explore.
            • B. Add-Windows Image
            • C. Nano Server Image Builder
            • D. Server Manager

            Answer: D

            NEW QUESTION 19
            Note: This question is part of a series of questions that present the same scenario. Each question in
            the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
            You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
            You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
            Solution: You create a system configuration information data collector. Does this meet the goal?

            • A. Yes
            • B. No

            Answer: B

            NEW QUESTION 20
            Your manager has asked you to configure the company Windows Server 2016 domain controller.
            He wants all new computer accounts to be placed in the General OU, when computers join the domain.
            Which command should you use to accomplish this?

            • A. Dsmove
            • B. Netdom
            • C. Redircmp
            • D. None of these

            Answer: C

            Explanation: The Redircmp command is used to redirect the default OU of a newly created object such as a user to another OU.

            P.S. Easily pass 70-740 Exam with 296 Q&As Certleader Dumps & pdf Version, Welcome to Download the Newest Certleader 70-740 Dumps: https://www.certleader.com/70-740-dumps.html (296 New Questions)