We offers 70-740 dumps. "Installation, Storage, and Compute with Windows Server 2016", also known as 70-740 exam, is a Microsoft Certification. This set of posts, Passing the 70-740 exam with 70-740 dumps, will help you answer those questions. The 70-740 exam covers all the knowledge points of the real exam. 100% real 70-740 dumps and revised by experts!

Online 70-740 free questions and answers of New Version:

NEW QUESTION 1
HOTSPOT
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.
70-740 dumps exhibit

    Answer:

    Explanation: 70-740 dumps exhibit

    NEW QUESTION 2
    HOTSPOT
    Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
    During normal network operations, you run the following commands on DC2:
    Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole PDCEmulator Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole RIDMaster DC1 fails.
    You remove DC1 from the network, and then you run the following command:
    Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole SchemaMaster For each of the following statements, select Yes if the statement is true. Otherwise, select No
    70-740 dumps exhibit

      Answer:

      Explanation: 70-740 dumps exhibit

      NEW QUESTION 3
      Note: This question is part of a series of questions that present the same scenario. Each question in
      the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You have an Exchange Server 2016 organization.
      Some users access the mailbox on their mobile device by using Exchange ActiveSync.
      You need to prevent the users from synchronizing more than one month of email or calendar data to their device.
      Solution: You deploy an Allow/Block/Quarantine policy. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 4
      DRAG DROP
      Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.
      You install IP Address Management (IPAM) on Server1.
      You need to manually start discovery of the servers that IPAM can manage in contoso.com.
      Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
      70-740 dumps exhibit

        Answer:

        Explanation:
        https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning

        NEW QUESTION 5
        HOTSPOT
        You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 connect to the same network.
        Server1 and Server2 have virtual switches configured as shown in the following table.
        70-740 dumps exhibit
        You have nine virtual machines configured as shown in the following table.
        70-740 dumps exhibit
        All of the virtual machines are configured to have IP addresses from the same network segment. The firewall on each of the virtual machines is configured to allow network connectivity.
        To which virtual machines can you connect from VM1 and VM2? To answer, select the appropriate options in the answer area.
        70-740 dumps exhibit

          Answer:

          Explanation: 70-740 dumps exhibit

          NEW QUESTION 6
          DRAG DROP
          You are preparing an image of Windows Server 2016.
          The image is missing the driver foe a network adapter that is required in your environment. You need to ensure that the image contains the network adapter driver.
          Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them m the correct order.
          70-740 dumps exhibit

            Answer:

            Explanation: 70-740 dumps exhibit

            NEW QUESTION 7
            Note: This question is part of a series of questions that use the same scenario. For your convenience,
            the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
            Start of repeated scenario
            Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
            The domain contains nine servers that are configured as shown in the following table.
            70-740 dumps exhibit
            The virtual machines are configured as follows:
            Each virtual machine has one virtual network adapter.
            VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
            All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
            You plan to implement nested virtual machines on VM1.
            Which two features will you be prevented from using for VM1?

            • A. NUMA spanning
            • B. live migration
            • C. Dynamic Memory
            • D. Smart Pathing

            Answer: BC

            Explanation: References:
            https://blogs.technet.microsoft.com/virtualization/2015/10/13/windows-insider-preview-nested-virtualization/

            NEW QUESTION 8
            You have a server named Server1 that runs Windows Server 2016.
            The disks on Server1 are configured as shown in the following table.
            70-740 dumps exhibit
            Windows Server 2016 is installed in C:\Windows.
            On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

            • A. C:
            • B. D:
            • C. E:
            • D. F:
            • E. G:

            Answer: CE

            NEW QUESTION 9
            Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have multiple local disks attached.
            You need to create a storage pool by using Storage Spaces Direct.
            Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
            70-740 dumps exhibit

              Answer:

              Explanation: References:
              https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploy-storage-spaces-direct

              NEW QUESTION 10
              HOTSPOT
              Your network contains an Active Directory domain named contoso com The domain contains tour servers named Server 1. Server2. Server3. and Server4 that run Windows Server 2016
              Server 1 and Server2 are nodes in Hyper-V cluster named Cluster1 You have a highly available virtual machine named VM1
              Server1 is the owner node of VM1 Server3and Server4 are nodes of a scale-out file server named Cluster2,
              The storage on Server1 is configured as shown in the following table
              70-740 dumps exhibit
              You need to move the virtual disk of VM1 to a different location
              What should you do? To answer, select the appropriate options in the answer area
              70-740 dumps exhibit

                Answer:

                Explanation: 70-740 dumps exhibit

                NEW QUESTION 11
                HOTSPOT
                Your network contains an Active Directory domain named Adatum.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The domain contains three users named User1, User2, and User3.
                Server1 has a share named Share1 that has the following configurations.
                70-740 dumps exhibit
                The share permissions for Share1 are configured as shown in the Share1 exhibit. (Click the Exhibit button.)
                70-740 dumps exhibit
                Share1 contains a file named File1.txt. The Advanced Security Settings for File1.txt are configured as shown in the File1.txt exhibit. (Click the Exhibit button.)
                70-740 dumps exhibit
                For each of the following statement, select Yes if the statement is true. Otherwise, select No.
                70-740 dumps exhibit

                  Answer:

                  Explanation: 70-740 dumps exhibit

                  NEW QUESTION 12
                  You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run?

                  • A. the dns.exe command
                  • B. the optionalfcaturcs.exe command
                  • C. the Install-Package cmdlet
                  • D. the Enable-WindowsOptionalFeature cmdlet

                  Answer: D

                  NEW QUESTION 13
                  NOTE: This Question is a part of a series of questions that use the same or similar answer choices. An
                  answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
                  You have two- node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1.
                  You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.
                  Which tool should you use?

                  • A. the clussvc.exe command
                  • B. the cluster.exe command
                  • C. the computer Management snap-in
                  • D. the configurehyper.exe command
                  • E. the Disk Management snap-in
                  • F. the Failover Cluster Manager snap-in
                  • G. the Hyper-V Manager snap-in
                  • H. the Server Manager app

                  Answer: F

                  NEW QUESTION 14
                  Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
                  You have a Hyper-V host named Server1 that runs Windows Server 2016 You plan to deploy several shielded virtual machines on Server1
                  You deploy a Host Guardian on a new server
                  You need to ensure that Server1 can host shielded virtual machines. What should you run first?

                  • A. the Mount-VHD cmdlet
                  • B. the Diskpart command
                  • C. the Set-VHD cmdlet
                  • D. the Set-VM cmdlet
                  • E. the Set-VMHost cmdlet
                  • F. the Set-VMProcessor cmdlet
                  • G. the Install-WindowsFeature cmdlet
                  • H. the Optimize-VHD cmdlet

                  Answer: G

                  NEW QUESTION 15
                  You want to capture the state, data, and hardware configuration of a running virtual machine.
                  Which checkpoint can be very useful if you need to recreate a specific state or condition of a running virtual machine so that you can troubleshoot a problem?

                  • A. Production
                  • B. Standard

                  Answer: B

                  Explanation: Standard checkpoints capture the state, data, and hardware configuration of a running virtual machine and are intended for use in development and test scenarios.

                  NEW QUESTION 16
                  You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.
                  Server1 and Server2 have the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. Server2 hosts a virtual machine named VM2. Server3 hosts the disks and the configurations of both virtual machines on an SMB share named VMShare.
                  You use Server4 to manage Hyper-V operations on Server1 and Server2.
                  From Server4, you attempt to perform a live migration of VM1 and VM2, but you receive the following error message: “No credentials are available in the security package”.
                  You need to ensure that you can perform the live migration of VM1 and VM2 between Server1 and Server2 while signed in to Server4.
                  What should you do?

                  • A. From Active Directory Users and Computers, modify the properties of Server4. Configure the delegation settings to trust the computer for delegation of cifs.
                  • B. From Windows PowerShell on Server3, run the remove-SMBMultiChannelConstraint cmdlet, and then assign Server4 Full Control permissions to VMShare.
                  • C. From Active Directory Users and Computers, modify the properties of Server1 and Server2. Configure the Delegation settings to trust the computers for delegation of the Microsoft Virtual System Migration Service.
                  • D. From Active Directory Users and Computers, modify the properties of your user accoun
                  • E. Modify the Account is sensitive and cannot be delegated setting.

                  Answer: C

                  Explanation: References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/set- up-hosts-for-live-migration-without-failover-clustering

                  NEW QUESTION 17
                  You have a Windows Server 2016 failover Cluster named Cluster 1 that contains four nodes named Server1 Server2, Server3, and Serve4.
                  You need to configure Cluster to use directly attached storage to store several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1.
                  What should you do next?

                  • A. Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes.
                  • B. Create volumes.
                  • C. Create storage pool.
                  • D. Add-ClustcrResource mdlet on all of the nodes.

                  Answer: B

                  Explanation: References:
                  https://medium.com/beyond-the-helpdesk/setting-up-and-configuring-storage-spaces-direct-in-windows-server-2016-4d2be85a8f7d

                  NEW QUESTION 18
                  Your network contains an Active Directory domain.
                  The domain contains two Hyper-V hosts.
                  You plan to perform live migrations between the hosts.
                  You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

                  • A. From Server Manager, install the Host Guardian Service server role on a domain controller.
                  • B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
                  • C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
                  • D. From Server Manager, install the Host Guardian Service server role on both servers.

                  Answer: C

                  Explanation: If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.

                  NEW QUESTION 19
                  DRAG DROP
                  You have a Hyper-V host named Server1 that runs Windows Server 2016.
                  The installation source files for Windows Server 2016 are located in D:\Source. You need to create a Nano Server image.
                  Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.
                  70-740 dumps exhibit

                    Answer:

                    Explanation:
                    Step 1: Import Module
                    Import-Module .\NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage
                    Create Nano Server Image VHDX
                    New-NanoServerImage -MediaPath .\Files -BasePath.\Base -TargetPath .\Images\NanoVMGA.vhdx References: https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy-nano- server

                    NEW QUESTION 20
                    You are configuring a Windows Server 2016 failover cluster in a workgroup.
                    Before installing one of the nodes, you run the ipconfig /all command and receive the following output
                    70-740 dumps exhibit
                    You need lo ensure that Server 1 can be added as a node in the cluster What should you do1?

                    • A. Assign a static IP address
                    • B. Change the Node Type to Broadcast
                    • C. Configure a DNS suffix
                    • D. Enable NetBIOS over TCP/IP

                    Answer: C

                    P.S. Easily pass 70-740 Exam with 296 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 70-740 Dumps: https://www.surepassexam.com/70-740-exam-dumps.html (296 New Questions)